The Flo device is installed on the homes main water line just after the pressure reducing valve (if applicable) and before the plumbing system branches off into the different fixtures in the home. In some cases reconfiguring the existing pipe and fittings will be necessary to complete the installation on the homes main water line.
NOTE: DO NOT install Flo on fire sprinkler or fire suppression systems.
The Flo Device includes 2 brass, threaded union fittings when installing on the homes main water line. The installer will decide on which configuration will best suit the installation.
If you would like to order brass, "sweat" tailpieces please contact firstname.lastname@example.org.
In some cases where space is limited or the homes water line and needs to be reconfigured to properly install the Flo Device, additional piping, bent connectors (“elbows”) and fittings can be added to create the proper installation/configuration.
Once the Flo Device is installed, connect the AC power adaptor to a nearby outlet to power the Flo device.
If needed you may order low voltage extension cords by visiting: https://meetflo.com/products/25-ft-extension-cord/
If you need assistance please contact us.